-
Material Rubber; Suitable for Connection Below/Rear
Protection cap -
Manometer sealing
-
Material Brass
Self sealing adapter -
Extension
Manometer adapter Series TH93 -
Impact absorber for manometers Series AB01
-
Connection spigot; Pressure tap horizontal only; Clamping sleeve According to DIN 16283, AF27; Operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inletSiphon in U-shape According to DIN 16282 Series SI001
-
Welding connection; Pressure tap horizontal only; Clamping sleeve According to DIN 16283, AF27; Operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inletSiphon in U-shape According to DIN 16282 Series SI002
-
Connection spigot; Pressure tap vertical only; Clamping sleeve According to DIN 16283, AF27; Operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inletSiphon in ring-shape According to DIN 16282 Series SI003
-
Welding connection; Pressure tap vertical only; Clamping sleeve According to DIN 16283, AF27; Operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inlet
Siphon in ring-shape According to DIN 16282 Series SI004 -
Female thread/Female thread; Temperature Max. 50°C; Drain hole
Manometer stopcock Series MSC01 -
Female thread/Spigot; Temperature Max. 50°C; Drain hole
Manometer stopcock Series MSC02 -
Female thread/Swivel sleeve; Temperature Max. 50°C; Drain hole
Manometer stopcock Series MSC03 -
Spigot/Swivel sleeve; Temperature Max. 50°C; Drain hole
Manometer stopcock Series MSC04 -
Spigot/Clamping sleeve; Temperature Max. 50°C; Drain hole
Manometer stopcock Series MSC05 -
With drain hole; Pressure measuring at pressed button only, after releasing valve closes automatically; Manometer is depressurized in normal position; Pressure range Max. 25bar, DVGW-certification Max. 4bar
Manometer push button valve Series MPB01 -
According to DIN 16270; Spigot/Clamping sleeve
Manometer stop-valve Series MSV01 -
According to DIN 16270; Spigot/Swivel sleeve, Shank for holder of measuring instruments
Manometer stop-valve Series MSV02 -
According to DIN 16271; Spigot/Tension sleeve with test spigot M20x1,5
Manometer stop-valve Series MSV03 -
According to DIN 16271; Spigot/Swivel sleeve, Shaft for holder of measuring instruments with test spigot M20x1,5
Manometer stop-valve Series MSV04 -
According to DIN 16271; Spigot/Tension sleeve with test flange 60x25x10
Manometer stop-valve Series MSV05
|
Manometer stopcock Series MSC04Spigot/Swivel sleeve; Temperature Max. 50°C; Drain hole |
| Connection | Test flange | Operating pressure | Material | Type | Sequence |
|---|---|---|---|---|---|
| 1/2" | - | Max. 25 bar | Messing | MSC04-12-B | 12690000 |
| 1/2" | 60x25 | Max. 25 bar | Messing | MSC04-12-B-6 | 12690001 |